Elitron’s leather cutting platform gets larger

Italy
Published:  17 May, 2017

During ILM’s visit to this year’s Simac, we had the opportunity to drop by at Elitron’s booth where Giambattista Mele, Head of Sales, presented us the latest company innovation: Plaza TH, a double head flatbed cutting solution which is Elitron’s answer to cope with high workloads of medium/big sized hides for leather goods, furniture and automotive upholstery. 

Two additional cutting solutions and plenty of innovation for an improved finishing workflow

However, innovation never sleeps at Elitron and, much likely, Simac was the beginning of a new generation of cutting solutions. In fact, just two months later the company has further enlarged the Plaza Series platform with an additional solution called Plaza T. Specifically designed for operating not just on leather hides but rather on a wider variety of resistant and critical materials, Plaza T is a finishing solution featured with a revolutionary cutting head set-up which can be fitted with a milling router, a creasing wheel and circular blade along with the usual set of blades (both electric and pneumatic), perforators, plotting pen module and pricker. If such a rich variety of tools wasn’t enough, there is even extra flexibility granted by a beam whose available height can reach 50 or 120mm.

So far, Elitron’s Plaza Series counts of four different cutting solutions and provide a solution to each industry’s cutting needs; from fashion, footwear and leather goods, to automotive upholstery and furniture.

Plaza Focus: cutting of medium/big sized hides. Cutting heads: one.
Available sizes of working area: three (3200 x 1600; 4000 x 2500; 6200 x 2500 mm.) Tools slots: four (electric blade, plotting pen, perforator, pricker)

Plaza TH Focus: cutting of medium/big sized hides. Cutting heads: two, independent. Available sizes of working area: two (4000 x 2500; 6200 x 2500mm.). Tools slots: 4 x 2 (electric blade, plotting pen, perforator, pricker)

Plaza T Focus: cutting of medium/big sized hides, foams, textiles, synthetic textiles and many more. Cutting heads: one. Available sizes of working area: three (3200 x 1600; 4000 x 2500; 6200 x 2500mm). Tools slots: six. Standard tool slot: electric or pneumatic blade, plotting pen, perforator, laser pointer

Additional tool slot: milling router, creasing wheel or circular blade

Plaza LTA Focus: cutting of medium/big sized hides with three integrated areas for loading, cutting, unloading. Cutting heads: two, independent. Available sizes of working area: 1 (3000 x 2500mm). Tools slots: 4 x 2 (electric or pneumatic blade, plotting pen, perforator, pricker)

This flexible and targeted portfolio of offerings is also the platform on which Elitron aims at building its idea of innovative leather cutting workflow. Through the synergy of the cutting solutions, together with the VISIO scanning tables and the powerful offline nesting software OPERA, new frontiers of productivity will soon be explored.

comments powered by Disqus